If you have a baby who is learning how to crawl or walk, the home has plenty of spots where it can pose dangers to a child. One of the most accident-prone locations for toddlers is the stairs, followed by the bathroom and kitchen. Because of this, it is crucial that you section off certain parts of the house to prevent the probability of accidents. Majority of parents employ the use of one or several baby gates to maintain safety around the house.
Closing the door is the easiest method to keep toddlers away from certain spots, but this is not possible all the time especially in areas like the kitchen, which are often not designed with a door. These sorts of spots are good candidates for the setting up of a baby gate since it is likely to prevent children from going inside those areas, but will still grant access to adults or pets.
There are several different types of gates being sold these days but for most parents, the hardware-mounted kind is the popular choice. This gate is physically secured to the wall by means of a mounting plate and screws. But they are typically built in a way that the gate can be disengaged momentarily if required. Several models even swing open like a door.
The baby gate is employed in homes to keep toddlers from going to a variety of locations in a house or building. There are two types of baby gates, the pressure gate, and the aforementioned hardware-mounted gate. The pressure gate does not need any installation and instead depends on an item like a spring which acts as a tensioner. It fixes the gate between two solid surfaces. For the best baby gates for stairs, the hardware-mounted one is the better option.
Even the most high-end pressure gates will eventually give way since bigger kids are capable of knocking over or drawing the gates. The pressure gate is ideal for preventing access to locations that are on the same level, however, they are not recommended for stairs. The hardware-mounted or simply hardware gate is more ideal for safeguarding the stairs.
Majority of hardware gates are designed and built to swing open like a door and as for the stairs, it is essential that the gate swings away from the steps of the stairs to further protect children from accidents.
Majority of baby gates are built from wooden material but there are also metal and plastic models available. Wooden gates should not have rough parts that can break the skin or cause scratches. The gate should also be free from sharp corners or edges, and this includes materials from wood down to metal.
Plenty of individuals actually remember baby gates that are designed like an accordion from their childhood days. This kind of gate can be opened and shut like the musical instrument and it includes holes that have diamond shapes located in the center.
The topmost edge of the gate meanders with the open V parts all the way down the length of the top. This particular design had choking and trapping risks so the accordion gate was never produced again.
Parents should guarantee that the gate should not have gaps that exceed 2.5 inches between its slats so toddlers are not able to stick their heads between them. The gate should also be free from spots that could snag children’s clothing.
Even though the tension gate is not recommended for use on stairs, this kind is still the go to choice for some parents. The hardware-mounted gate is more dependable but keep in mind that you have to check on the mounting every so often to guarantee that the gate’s parts did not slacken.
Gates are employed in a myriad of homes and it does a helpful good turn for all parents. However, remember that it is always crucial to not exclusively depend on the safety of those gates. To safeguard the stairs, make sure that you have those hardware mounted models secured on them at all times until your child is big enough to look out for their own safety.